Speed Dome Camera Instruction Manual
31
Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
Alarm Input Setup
ALARM INPUT SETUP
------------------------
ALARM NO. 1
TYPE N.OPEN
ACTION NOT USED
HOLD TIME ENDLESS
POST ACTION HOME
BACK
EXIT
4
HOW TO USE OSD MENU
If Park Enable is set to ON, camera runs assigned function automatically
if there is no PTZ command during assigned "Wait Time".
z
Park Enable
[ON/OFF]
z
Wait Time
[
1~59 sec/1~180 minute
]
The time is displayed with "hh:mm:ss" format
and can be changed in 1 min units.
z
Park Action
[HOME/PRESET/PATTERN/SWING/GROUP]
{
U
HOME
Camera moves to home position if there is no
PTZ command during assigned "Wait Time".
Matches the Alarm sensor input to one of Preset positions. If an external
sensor is activated, camera will move to corresponding preset position
when this item is predefined.
z
Alarm
×
Type
[Normal OPEN/Normal CLOSE]
Sets sensor input type.
z
Alarm
×
Action
[NOT USED/PRESET
/PATTERN,SWING/GROUP
]
Assign counteraction Preset position to each
Alarm input.
z
Hold Time
[ENDLESS/1~59 sec/1~180 minute]
Sets the time period for the action which is run
by external sensor activation. After the time
period passes, the action pre-defined in
“
Post
Action
”
runs sequentially in succession to the
action by external sensor activation. If this option
is set to
“
ENDLESS
”
,
“
Post Action
”
does not
activate.
z
Post Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV
ACTION]
