CBC Ganz ZT-WD Series, Instruction Manual

Page: 22 / 27

22
DIP Switching Setting
A. 485 Termenation
B. Protocal
C. Baud Rate Setting
The 4
th
of DIP SW1 is used for 100Ω termination.
Set the termination on the last looped camera on the entire system.
The 3
rd
of DIP SW1 above are used for protocol setting.
The 1
st
, 2
nd
SW of DIP SW1 above a used for BAUD RATE setting.
DIP SW can be changeable to 4,800bps, 9,600bps.
DIP SW1 - 3rd PROTOCOL
OFF Pelco-D or Pelco-P
ON Not used
DIP SW1 - 1st DIP SW1 - 2nd BAUD RATE
OFF OFF 2,400bps
ON OFF 4,800bps
OFF ON 9,600bps
ON ON Not used
THERMINATION
SW1-4th ON
CAM 1 CAM 2 CAM 3 CAM n
Factory default : 2,400bps
Note!!
BAUD RATE 1
BAUD RATE 2
PROTOCOL 3
(SW1) TERMINAL 4
(SW2) Camera ID