4)
Input a Trigger preset name.
5)
Select ‘Video Source’.
6)
Select the discovery target class.
It is possible to select multiple objects for detection.
The detection target may vary depending on the algorithm setting of the
selected ‘Video Source’.
7)
Set ‘Direction’
enter - detect the target enters the zone.
exit - detect the target goes out of the zone.
both - detect both directions.
8)
Show additional settin
gs when you check for the ‘Advanced Setup’.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
222
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
60
