walnut
LOW DRESSER
Made in Vietnam - r04
Page 2 of 5
1
2
A. Insert 4
wood dowels
and 2
cams
into
partition
as shown. Make sure arrow on each cam
point toward nearest edge with holes.
B. Insert 4
wood dowels
2
cams
into
right and
left side panels
as shown.
3
4
A. Attach 4
legs
to
bottom panel
with 2
small
bolts
per leg as shown. Secure, but do not over
tighten, bolts with a
phillips head screwdriver
.
B. Insert
support leg
to
bottom panel
. Turn
clockwise to secure.
NOTE: Do not
over tighten
the bolts
Insert
back panel
into grooves of side panels and
bottom panel as shown.
A. Position
bottom panel
upright. Fit dowels of
side
panels
and partition into
bottom panel
as shown.
B. Using a screwdriver, secure side panels and
partition with 9
medium bolts
, 9
spring washers
and 9
flat washers
.
A
B
NOTE: Make sure arrow
on each cam points
toward nearest edge
with holes
A
B
A
A
B
B
side panel
partition
NOTE: Make sure
grooves of side/bottom
panels are assembled
on the same side
during assembly
NOTE: Make sure the
drawer glides pull out away
from back grooves of side/bottom
panels during assembly
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
