veer
WARDROBE
Made in Vietnam - r04
Page 6 of 6
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
A
C
D
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a
qualified professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete,
etc.). Mount to wood studs whenever possible.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each
mounting bracket on the back of the unit.
C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller
in diameter than the anchor. Gently tap the
plastic anchor
until the flange of the anchor is flush with the
wall.
D) Attach the
mounting brackets
to the wall by inserting 2
large screws
through each mounting
bracket and into the wall anchor in the wall.
E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.
F) Lace one end of each
wall strap
through corresponding brackets, and into the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
optional wall mounting assembly
WALL
F
