Made in Vietnam - r04
Page 4 of 5
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
9
the wall
WARDROBE
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Insert 8
shelf pins
at desired shelf heights. Place
each
adjustable
shelf
on pins, making sure shelf
is securely supported by shelf pins.
Assembly is now complete.
A
C D
F
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to
wood studs whenever possible.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your local
hardware store.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per
bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the mounting bracket mounted to the back of the
unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in
the wall that is slightly smaller in diameter than the anchor. Gently tap the
plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach 2
mounting brackets
to the wall by inserting 2 l
arge screws
through each mounting bracket and into the wall anchor.
E) Place the unit so the mounting brackets on the back edge are aligned
with the wall brackets.
F) Lace one end of each
wall strap
through brackets, and into the other
end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
