sidecar
HIGH DINING TABLE
Made in Thailand - r05
Page 5 of 5
A. Fit
bottom/top crossbars
onto corresponding
brackets of assembled unit as shown. Secure
each bracket with 2
small bolts
, using an
allen
wrench
. Do not over tighten the bolts.
B. At the point, fit bottom/top crossbars onto
corresponding brackets of
leg frame
as shown.
Secure each bracket with 2
small bolts
.
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
13
15
16
Attach
top panel
to assembled unit with 8
large
bolts
for leg/crossbar assembly and 6
medium
bolts
for storage assembly as shown. Secure all
bolts with an allen wrench.
Insert 6
levelers
to bottom of assembled unit as
shown. Turn clockwise to secure/adjust. With the
assistance of another adult, carefully position unit
upright.
Assembly is now complete.
With the assistance of another adult, carefully
position unit upright as shown. Attach 2
brackets
to
left side panel
of assembled unit with 2
small
screws
per bracket as shown. Secure screws
with a screwdriver.
14
leveler
top panel
storage
assembly
leg/crossbar
assembly
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water. When moving the assembled table to a new location, it is recommended that the table is picked
up on both sides by 2 adults, carried and gently placed down at the new location. Never drag the table as this could cause
damage.
NOTE: Make sure open
part of each bracket
is facing up as shown
A
leg frame
bottom
crossbar
top
crossbar
NOTE: Do not
over tighten the
bolts
B
