For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a
qualified professional or your local hardware store.
A. Attach 2
brackets
to the top of the assembled unit with 2
small screws
per bracket.
B. With the assistance of another adult, place the unit in desired location against the wall. Mark the
location of the hole in the bracket on the wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the anchors. Insert 1
plastic anchor
into each hole until
they are flush to the wall.
D. Insert 2
large screws
through each
bracket
and plastic anchor. Secure, but do not over tighten
with a
phillips head screwdriver.
E. Place the unit back into position against the wall and thread the
wall strap
through both brackets
and pull until tight.
Wall mounting assembly is now complete.
optional wall mounting instructions
shake
TALL CHEST
Made in Vietnam - r03
Page 6 of 6
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
A
C
D
E
