A. Insert 4
cams
into bottom of
bottom panel
as shown.
B. Fit dowels of
bottom panel
into correspond-
ing holes of each
side panel
. Secure cams.
Insert 8
cam screws
into
top panel
as shown.
7
5
6
A. Fit
top panel
onto corresponding dowels of
assembly as shown. Secure
cams
. At this
point, cover cams with
cam covers
.
B. Secure assembly with 2
large bolts
, 2
spring
washers
and 2
flat washers
as shown, using
an
allen wrench
. Position unit upright.
Assembly is now complete.
Made in Vietnam - r05
Page 3 of 4
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
pezzo
STACKING STORAGE UNIT / BENCH
A
B
top panel
top panel
A
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners.
WEIGHT LIMITATIONS
1 UNIT/MEDIA STAND: This item is able to
support up to a total of 53 lbs evenly
distributed.
1 UNIT/BENCH: This item is able to support
up to a total of 325 lbs evenly distributed.
2-3 STACKED UNITS/BOOKCASE: This item
is able to support up to 130 lbs (top surface),
37lbs (side shelves) and 55lbs (center shelves);
all evenly distributed.
A