monolith
WARDROBE (LEFT)
Made in Vietnam - r03
Page 6 of 6
For added safety and stability, it is recommended that the wall mounting hardware be installed.
For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each
mounting brackets mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap the
plastic anchor
until the flange of the anchor is
flush with the wall.
D) Attach the
mounting brackets
to the wall by inserting 2
large screws
through each mounting
bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of each
wall strap
through corresponding brackets, and into the other end of the
strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
wall mounting assembly
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
WALL
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
