halogen
CREDENZA
Made in Thailand - r04
Page 2 of 4
1
2
Insert 6
cam screws into top panel as shown.
Secure, but do not over tighten, using a
phillips
head screwdriver.
3
4
A. Insert 2
cams and 4 wood dowels into left and
right side panels and center panel as shown.
Make sure arrows on each cam points toward
nearest edge with holes as shown.
cam screws
NOTE: Do not
over tighten cam screws
NOTE: Make sure arrows
on each cam points towards
nearest edge with holes
left and right
side panels
center panel
back panel
With the assistance of another adult, slide
back
panel down into grooves of top and side panels as
shown.
center panel
right
side
panel
Fit dowels of
center, left and right side panels into
corresponding holes of
top panel as shown. Make
sure grooves on the side panels are on the same
side as the top panel. With a screwdriver, turn each
cam clockwise until it securely engages each cam
screw.
left
side
panel
top panel
top panel
NOTE: Make sure grooves
on the side panels are on
the same side as the top panel
NOTE: Make sure
unfinished edge of center
panel is facing the back
during assembly
NOTE: Make sure
sticker on back panel
is facing outwards
during assembly
Customer Service
800.606.6252 | Latest instructions available at www.cb2.com
