grid
MEDIA CONSOLE
Made in China - r07
Page 5 of 5
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
For added safety and stability, it is recommended that the wall mounting hardware
be installed. For safe mounting, it is essential to use wall anchors appropriate to
your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 2
mountin
g b
rackets
to top of unit using 1
sma
ll
screw
per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2"
below each mounting brackets mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall
that is slightly smaller in diameter than the anchor. Gently tap the
plastic
anchor
until the flange of the anchor is flush with the wall.
D) Attach the
mountin
g b
rackets
to the wall by inserting 1
large
screw
through
each mounting bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with the
wall bracket.
F) Lace one end of each
wall
stra
p
through corresponding brackets, and into the
other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
NOTE:
If yo
u
are
unsure
abo
ut y
our
w
a
ll ty
p
e
o
r
w
hat mount
ing
method y
ou
should
use
,
consult
a
q
ualifie
d p
rofessional
o
r yo
ur
l
oca
l
hardwar
e st
ore.
wall mounting assembly
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
WALL
