CB Tech WATER GUARDIAN MPADC, User Manual

Page: 10 / 24

8
Operation
Maintenance
1. For unfiltered water, press the left button on the diverter valve. Water
from the faucet will emerge from the unfiltered water spout.
2. For filtered water, press the right button on the diverter valve. Water
from the faucet will flow through the DWS before emerging from the
filtered water spout.
Regarding Filter Capacity
1. Exact filter capacity varies in proportion to the amount of water used and
the level of impurities in the water being processed. For contaminants
reduced through physiochemical adsorption, the filter capacity is
750 gallons. For contaminants reduced through mechanical filtration,
capacity claims are inapplicable due to broad variations in the quality
and quantity of physical matter in the drinking water. Excessive physical
matter will cause the DWS to clog, diminishing flow rate but reducing
the contaminants from the resultant water stream.
2. For optimum performance and to maintain the Manufacturer’s
warranty against defects on your system housing, it is essential that the
filter be replaced when the first of the following occurs:
a. Annually
b. When the system is near or has reached its rated capacity
c. When the flow rate diminishes
d. When the filter becomes saturated with bad tastes and/or odors.
c. Press the left button to select the unfiltered water spout, and then
turn off the faucet.
6. Check all connections to make sure that there are no leaks.
7. Congratulations! Your system is now ready for use!