- 22 -
SETTING UP
First screw the
breating hose onto
the helmet.
Screw the loose
running nut onto
the Flow Control
Valve.
Take the quick
disconnect fitting
on the Air Supply
Hose and push
onto the tail of the
Flow Control Valve.
Connect the Air
Supply Hose Tail to
the Airblast helmet
air filter supplying
EN12021 grade air.
HEAD HARNESS
To adjust the head harness first unclip the locating
pegs, then slide the band in or out to the desired size.
Note: slide inwards to reduce the size (more suitable
for smaller heads) as shown in Fig 6.1. Once the
desired size is obtained, clip the locating pegs back
together.
Fig. 6.1
PUTTING THE HELMET ON
Hold the helmet in front of you, holding the inner bib
collar open. Lift the helmet and place it on your head
making sure the head harness fits securely.
Fig. 7.1
ATTENZIONE !
Do not use this helmet without the inner lens in place.