Cayin m-50CD, User Manual, Page: 9 / 16

Turning on/off the unit
Press the Power Switch (POWER) on the front panel, the unit will firstly execute
closing disc tray, the display will show , and the unit will do selfcheck.
“-- ----”
Playback
1.Press the Button on the front panel or the Button on the Remote Control
Unit, the Disc Tray slides out.
2.Place the compact disc in the Disc Tray label-side up.
3.Press the Button on the front panel or the Button on the Remote Control
Unit, the Disc Tray is closed.
4.After the Display indicates the number of tracks on the disc and the total time of
the disc, press the Button on the front panel or the Button on the
Remote Control Unit to start playing the disc.
●
If the Disc Tray is open when you press the Button (or Button), it
will close automatically and start playing.
●
Normally, the disc will start playing with the first track. However, you can select
a different track using the Skip Buttons or the Number Buttons to start playing a
different selection.
Stop
●
During playback or in PAUSE mode, press the Button on the front panel or
the Stop Button on the Remote Control Unit to stop a disc that is playing and resets
the player.
Pause
●
During playback, press the Button on the front panel or the Button on
the Remote Control Unit to interrupt the playback temporarily.
●
Press the (or ) Button again to resume playback from the position
where PAUSE mode was entered.
●
Even when the player is in PAUSE mode, the disk motor is still revolving. Since
leaving the player in this condition can shorten the lifetime of the motor, do not
leave the player in PAUSE mode for a long period of time.
Operation
8