Cayin iHA-6, User Manual

Page: 8 / 10

Basic Operation
1. Please make sure the AC Voltage Selector is setup correctly for your local power
supply voltage. When selector is set at “230” (as displayed on the selector), the
amplifier is set to work with 220V-240V power supply voltage. When selector is
set at “115” (as displayed on the selector), the amplifier is set to work with
110V-120V power supply voltage.
2. Confirm all cables are properly connected and functional

Set the volume control at the front panel to the lowest position

Press down the Power button, the amplifier will start up, power indicator will
flash as the amplifier entered initialization process

Indicator stay on, the amplifier is ready for operation.
Note: Please do not remove any audio cable when the amplifier is normal
operation, this might cause damage to the amplifier or other associated
equipment.
3. Play music at your source equipment, put on your headphone and turn up the
volume, you can enjoy your music now.
Safety Precautions
1. Please make sure the AC Voltage Selector is setup correctly for your local power
supply voltage.
2. Unplug the power cord if you are not going to use the amplifier for an extended
period of time, and keep the machine in proper condition
3. Please handle with care, avoid tempering to the machine
4. The amplifier will not functional appropriately if moistures has developed inside
the amplifier, please avoid operate the machine until internal moistures has
cleared. Moistures can be caused

Placing the amplifier at a location when heater or steamer has just turned on;

Moving the machine from a cold environment to a warm location;

Moving the machine from a chilled (e.g., air conditioned room) to a hot and
humidity environment.
5. Do not attempt to service this product yourself. Opening the cover may expose
you to electric shock or other hazards.
6. The amplifier must be keep away from water dripping or water splitting, do not
place any object filled with liquid such as vases on the top or around the amplifier.
7. Do not attempt to disassembly the machine, all service and maintenance must be