Note: ou need wait for about 30 seconds after turning on the power every once because
the vacuum tubes need preheat.
Y
Please make sure the following preparations are well done before using:
III
CONNECTION DIAGRAM
AC Power
1. Before connecting, make sure the power mark on the real panel is same to the
power voltage of your area.
2. Be sure the Power Switch on the front panel of the CDT-17A is tuned off (in the
position).
3.Using the Power Cord (supplied), connect the Power Inlet on the CDT-17A's real
panel to the AC Power Outlet.
4. Press the Power Switch in. The Display will light up, indicating that the CD Player
is turned on.
5. To turn the CD Player off, press the Power Switch again and return it to the
position.
Unplug your CD player when it is not in use for a long period of time.
If you are using a switched outlet to turn on and off your CD Player, you should
leave the Power Switch in the
position. When AC Power is applied to the
unit, it will power up in fully active mode.
out
out
on
Connections
1.Analog Outputs(unbalance).
A pair of standard RCA jacks supplies an analog output signal from the CDT-17A
to the source inputs of an audio amplifier or other components. Using the audio cable
2
2. Don't confuse L with R of ANALOG
NOTE: 1. Be sure to use at rated voltage.
OUTPUT when connecting.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
OPTICAL
DIGITAL INPUT
COAXIAL
ANALOG OUTPUT
R
L
MODEL
SER. NO:
F1.5A250V
~230V 50/60Hz
D A PROCESSOR
/
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
ANALOG OUTPUT
UNBALANCE
RIGHT
LEFT
BALANCE
RIGHT
LEFT
FUSE T1AL250V
AC INPUT
~230V 50/60Hz 40W
COAXIAL
DIGITAL OUTPUT
OPTICAL
SPARK ELECTRONIC EQUIPMENT CO., LTD.
CDT-17A
SER. NO.:
MODEL:
AES/EBU
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
S200
RIGHT OUTPUT
SPARK ELECTRONIC EQUIPMENT CO., LTD.
MODEL
SER. NO:
1
2
3
+
~230V 50/60Hz 750W
FUSE T8A250V
1
2
3
-
BAL INPUT
PUSH
R
TAPE
TUNER
DVD
SIGNAL INPUT
PUSH
CD
L
The radiators will be heated up when
the unit is working, please be careful
L
R
+
-
ON
POWER
OFF
in order to avoid hurting to you.
LEFT OUTPUT
L
R
TAPE
OUT
AUX
BAL OUTPUT
AMPLIFIER
CDT 17A
-