CAVS USA INC
place it on the floor. Unlock the wheels on the bottom of JB-99RG and roll
the unit into its place.
1.1 When transporting the unit without its wooden crate, it is best to do so in its
upright position. If a height restriction does not allow the upright
positioning, then lay down the unit on its backside, preferably on top of a
soft carpet for easy sliding and protection. Then use cushions on both ends
of the unit to balance with the steel handle on the backside.
2. Installation
2.1 TV monitor
o
Attach the swivel joint found in the back bottom compartment of JB-99RG
onto the steel plate on the top of JB-99RG. Use the four bolts that came
with the swivel joint for the attachment.
o
Place the TV monitor on top of the swivel joint and attach it with the four
bolts that came in the side pocket of JB-99RG.
NOTE
: If you wish not to install the swivel joint, simply attach the TV monitor
directly onto the steel plate on the top of JB-99RG.
o
Insert the power cord of the TV into the circular hole on the top of the JB-
99RG and down to the bottom compartment. Plug the power cord of the TV
monitor into the multi-outlet inside the bottom compartment.
NOTE
: The multi-outlet may have come loose from its holders in the bottom
compartment while being transported. If so, place the multi-outlet into its position
on the floor of the bottom compartment and lock it into position by sliding it
against its holders.
o
Connect the video RC cable on the top of JB-99RG to the TV monitor Video
In.
4
