Cavium FastLinQ 45000 Series, User Manual

Page: 96 / 342

6–Boot from SAN Configuration
iSCSI Boot from SAN
69 BC0154501-00 P
2. In the iSCSI Boot Configuration Menu , select iSCSI General Parameters
( Figure 6-10 ), and then press ENTER.
Figure 6-10. Selecting General Parameters
3. On the iSCSI General Configuration page ( Figure 6-11 ), press the DOWN
ARROW key to select a parameter, and then press the ENTER key to input
the following values (
Table 6-2 on page 70 provides descriptions of these
parameters):
 TCP/IP Parameters via DHCP : Disabled

iSCSI Parameters via DHCP : Disabled
 CHAP Authentication : As required

IP Version : As required (IPv4 or IPv6)
 ARP Redirect : Not applicable for boot

DHCP Request Timeout : Default value or as required
 Target Login Timeout : Default value or as required
Figure 6-11. iSCSI General Configuration