Cavium FastLinQ 45000 Series, User Manual

Page: 270 / 342

14–Windows Server 2016
Configuring RoCE Interfaces with Hyper-V
243 BC0154501-00 P
3. On the Advanced page ( Figure 14-2 ):
a. Under Property , select Network Direct (RDMA) .
b. Under Value , select Enabled .
c. Click OK .
Figure 14-2. Hyper-V Virtual Ethernet Adapter Properties
4. To enable RDMA, issue the following Windows PowerShell command:
PS C:\Users\Administrator> Enable-NetAdapterRdma " vEthernet
(New Virtual Switch) "
PS C:\Users\Administrator>
Adding a vLAN ID to Host Virtual NIC
To add a vLAN ID to a host virtual NIC:
1. To find the host virtual NIC name, issue the following Windows PowerShell
command:
PS C:\Users\Administrator> Get-VMNetworkAdapter -ManagementOS