Cavium 41 Series, User Manual

Page: 4 / 321

iv AH0054602-00 J
User’s Guide—Converged Network Adapters
41
xxx Series
Added support for Windows Server 2019 to the
section. “Windows Server 2012 R2, 2016, and 2019 iSCSI
Boot Installation” on page 199
In the To create a Hyper-V virtual switch with an
RDMA NIC procedure:
 Changed the section title to “...RDMA NIC” (was
“...RDMA Virtual NIC”.
 Changed procedure title (was To create a
Hyper-V virtual switch with an RDMA virtual
NIC
),
 Added a new Step 1 : “On all physical inter-
faces, set the value of the NetworkDirect
Functionality parameter to Enabled .”
“Creating a Hyper-V Virtual Switch with an RDMA
NIC” on page 239
In the To add host virtual NICs procedure:
 In Step 2 , corrected the last digit of the com-
mand to “
S
” (was “
5
”).
 Changed the note’s first bullet, second sen-
tence to: “The same VLAN ID must be assigned
to ports on the switch” (was: “The same VLAN
ID must be assigned to all the interfaces, and
on the switch”).
“Adding a vLAN ID to Host Virtual NIC” on
page 240
Deleted the obsolete section, Default and
Maximum VMMQ Virtual NIC .
“Configuring VMMQ” on page 254
In Step 4 , deleted the note and example. “Creating a VM and Enabling VMMQ on VMNet-
workadapters in the VM” on page 257
In the first bullet, deleted the statement, “The
Management OS VNIC has four VMMQs.” “Enabling and Disabling VMMQ on a Management
NIC” on page 258
Added a note referencing the new parameter
added for Windows Server 2016 and Windows
Server 2019 to configure the maximum quantity of
queue pairs on a virtual port. “Monitoring Traffic Statistics” on page 258
Deleted the obsolete “Deploying and Managing a
Nano Server” section. Chapter 14 Windows Server 2016
Added a new chapter describing the features of
Windows Server 2019. Chapter 15 Windows Server 2019
In Table B-1 , added support for the Dell 10/25G
dual rate transceiver.
“Tested Cables and Optical Modules” on page 280
Added terms and definitions. Glossary