© 2013 O&M Manual Version 2.0 CaviDyne
TM
5077 Fruitville Rd.; Ste 109-157
Sarasota, FL 34234 U.S.A.
Phone 352.275 5319
Page 15/26
5.0 OPERATION
The CaviBlaster
®
2040-ROV should only be operated
by properly trained personnel who are familiar with
the contents of the manual. Review the safety
requirements found in Section 3 before operating.
5.1 Preparing the CaviBlaster
®
for Operation
The following checklist should be completed in advance, so that the unit is
always ready for immediate use. This should be completed after each use.
1) Inspect the CaviBlaster
®
power unit, hoses, JIC fittings and lance for any
signs of damage.
2) Inspect the water inlet strainer to ensure that it is not clogged (See Figure
2.1). Clean if necessary.
3) Check
for proper pressure pump oil level (See pump Owner’s Manual found
in the
Appendix
). Add oil (SAE 30 non-detergent) if necessary.
PUMP MUST
BE COMPLETELY FILLED.
Incorrect oils should not be used as they may
damage the equipment.
5.2 Startup of the CaviBlaster
®
Before starting the CaviBlaster
®
2040-ROV unit, review all safety requirements
found in Section
3.0
SAFETY INFORMATION
. This equipment should only be
operated by individuals who have read and understand the CaviBlaster
®
Operation and Maintenance Manual.
