Summarizing the operating instructions:
1. Inspect the system for damage. Clean the inlet strainer. Check oil/fuel
levels.
2. Attach all hoses to the unit and connect the feed pump electrical cable.
3. Start the feed pump or alternate water supply and ensure that the
system is primed.
4. Attach the gun to the pressure hose.
5. Make sure that the diver is ready to work and that the gun is
submerged in the water.
6. Apply hearing protection, start the engine and adjust the throttle to
“MAX.”
7. Activate the cleaning cavitation stream by squeezing the gun trigger
to open or “on.”
8. Proceed with cleaning.
9. Stop the feed pump.
10. Release pressure from the hose(s) by squeezing the gun
trigger to the open or “ON” position
while under water
.
11. Remove the gun from the water.
12. Flush the system and rinse the outside of the power unit with fresh
water.
Page -
11
CaviBlaster 1725-G Operations Manual
For More information please email [email protected] or call 1-(352)275-5319
