Pictogram Control button
Operation instruction
ON/OFF button
Press and hold for 2 seconds to turn on or turn off the appliance
Temperature select key
Press this button first to enter temperature control, then press temperature
UP and DOWN to adjust temperature
Temperature UP key
Press to increase the temperature after pressing temperature select key
Temperature DOWN key
Press to decrease the temperature after pressing temperature select key
Celsius/Fahrenheit display
change
Press to change temperature display from Celsius to Fahrenheit
Lighting mode
Press and hold for 3 seconds to select lighting modes, there are two
lighting modes to select
Lighting on mode
When LCD screen displays this pictogram, the lights will be permanently
turned on.
Lighting on/off model
When LCD screen displays this pictogram, the lights will be controlled by
door open and close, when door is open, the light will be turned on, when
door is closed, the light will be turned off. This is the default setting of
lighting mode.
Alarm system:
Pictogram
Alarm type
Details
Door open alarm
When door has been opened for over 5 minutes, door open alarm
will be on and LCD screen display this pictogram and beep 3 times
every 5 seconds, press any keys to stop the alarm sound. Alarm will
stop when door is closed.
Low temperature alarm
When inside temperature is below 2°C for over 3 hours, it will beep
to alarm and screen will flash display, press any key to stop alarm
sound
High temperature alarm
When inside temperature is above 25°C for over 6 hours, it will
beep to alarm and screen will flash display, press any key to stop
the alarm sound.
Low humidity alarm
When humidity inside cabinet is below 40% for over 3 hours, screen
will flash display, alarm will stop when humidity returns to normal
level.
High humidity alarm
When humidity inside cabinet is below 80% for over 1 hour, screen
will flash display, alarm will stop when humidity returns to normal
level.
Carbon filter expiry
alarm
When carbon filter has been used for over 365 days, the alarm will
activate and LCD screen will flash display with a beeping sound.
Press any key to stop the beeping sound. When alarm activates,
carbon filter has expired and new carbon filter replacement is
needed.
