24
Installing the stainless steel handle
This beverage cooler includes a stainless steel handle. To install the handle please follow the
below instructions:
1.
Pull away the door gasket in the area where the handle is to be installed on the left side as
shown below in
Illustration # 1
. The gasket is easily displaced by hand, no tools are
necessary.
2.
Align the handle with the screws installed. Tighten the screws using a Phillips head
screwdriver until the handle sets both flush and secured tightly against the door frame. (DO
NOT over tighten as this will cause damage to the handle assembly).
3.
Replace the door gasket to its original position.
4.
If you choose not to use the handle supplied, simply follow step 1 to access the installation
screws and remove them and then place the two decorative plugs into the two holes
separately. Continue on to step 3 to replace the door gasket to its original position.
Illustration # 1
Illustration # 2
1. Gasket
3. Phillips Head Screw Driver
2. Phillips Head Screw
4. Handle
