-no power supply
-low voltage
-fuse broken
FAILTURE
POSSIBLE CAUSE
SOLUTIONS
Ensure the wine cooler is
plugged in or check the circuit.
-The open wine is placed to
close to a heat source
-Gasket seals are dirty.
-Keep the wine cooler away from
sunshine or other heat sources.
-Clean the gasket seals.
-Poor ventilation
-Ensure that the wine cooler is
well ventilated and keep things
-Fan is not working.
-Ensure the plug is connected.
Alternatively you may need to
have the fan changed.
-The door is opened to
frequently or for a long period of
time, or was not closed tightly.
-Close the door tightly and leave
it shut for a while. Do not open
the door too frequently.
-Your wine cooler's running
temperature maybe too high.
-Check the temperature adjustor,
set to a lower (cooler) temperature.
Too Cold
-Too low temperature setting
Ambient temperature is too low
Raise temperature setting.
Turn heating on in room or move
your wine cooler to a warmer
place
Inside light flashes
-Set temperature is higher than
inside.
Adjust temperature.
Frost showing
-Too much humidity. The
ambient temperature is too low.
Unplug to defrost, plug again
after the frost thaws.
The open wine does
not work.
Wine cooler is not
reaching the desired
temperature.
-8-
pantone black pantone 194cv
ENERGY FAILURE
MOVE YOUR OPEN WINE
TROUBLESHOOTING
Unplug the electric cord whenever there is an electric failure or there is no power supply. When the power
supply is re-established please plug again the electric cord to current electricity.
-Remove all bottles from the inside.
-Be sure the open wine stays in an upright position during transportation.
If you are having any problems with your open wine, please check it against the table below before calling for
service.
