Page 11
Installation
(Continued)
Figure 9
Figure 8
Figure 7
Figure 10
Store excess wires in the wiring box.
4.
OPTIONAL: If you purchased a single-piece chimney cover, attach it to the hood in this step.
5.
Drop oil tunnel into recess support near rear of hood. Refer to Figure 9.
6.
To install baffle filters and stainless spacer(s), refer to
7.
Baffle Filters and Stainless Steel Spacers
on Page 22 for baffle
filter and stainless spacer placement. Refer to Figure 10 for the following five steps:
Angle baffle filter toward back of hood.
Push baffle filter up until almost level.
Slide forward into recess behind the front of hood.
Lower baffle filter.
Slide back until it fits into resting positions.
Repeat Step 8 to install all baffle filters and stainless spacers.
8.
OPTIONAL: Install heating lamps (not included) last. 220V or 120V (for USA & Canada), 250-Watt
9.
maximum per lamp.
Turn powe ON in control panel. Check all lights and fan operations.
10.
Make sure to leave this Installation Guide for the homeowner.
11.
Summary of Contents for AirPRO 238 Professional Series
Page 2: ......
Page 30: ...Page 28 Your Notes ...
Page 31: ...Page 29 Your Notes ...
Page 32: ...Page 30 Your Notes ...
