TOOLS RECOMMENDED FOR ASSEMBLY:
Hammer drill - Hammer (300 gr) - Slotted and Phillips screwdriver
RULES AND WARNINGS FOR INSTALLATION AND THE CORRECT USE OF THE
PRODUCT
•
Once you buy the product, carefully check that the package contains all the
parts required for mounting and that they are not cracked or damaged. In
case of need, contact the store for integration or replacement of damaged or
missing product.
•
The screws and the plugs for fixing the canopy to the wall are supplied for
generic walls. Check the composition of the wall where the canopy will be
installed, eventually buy different screw and plugs if necessary to generate a
tight seal. An incorrect use of the anchor can compromise product anchor to
the wall.
•
Be sure to mount the polycarbonate sheet with UV written toward the top.
Attention, in the event of incorrect assembly, we assume no liability for the
durability and aging of the product.
•
We recommend the application of silicone between the wall and the Alu
profile to ensure a better seal of the product.
•
Before final tightening of the product, please check with a level the correct
position of the product and make the appropriate corrections.
•
In case of installation of canopies with dimensions 120 and 150 cm, we
recommend use of 2 persons for proper installation of the product to the wall
•
The proper use for the product is as a canopy for protection from the sun and
rain over the doors and windows of a house. Any other use of the product is
to be considered improper and therefore not covered by warranty.
•
In case of heavy snowfall, remove snow from the shelter.
•
Do not hang any additional product to the canopy. Do not drill holes on the
structure as they could compromise the seal of the shelter.
•
Operating temperature: from -5 ° C to + 40 ° C.
•
Wash the product with a mild detergent solution, not to scratch the plastic
surfaces. Do not use hard brushes or abrasive cleaners.
•
The product is not a toy: keep away from children during use and installation.
Warning: choking hazard (for the presence of screws and gaskets)
•
After installation, dispose of packaging in accordance with local legislation.
•
The product is covered by a 2 years, starting from the date of purchase. Please
retain a proof of purchase.
•
Damage caused by incorrect use, misuse, use of force, negligence or
assembly not in accordance with the manual of instructions cause the waiver
of the manufacturer warranty.
•
Damage caused by incorrect storage of the product, might cause the waiver of
the manufacturer warranty.
•
In case of problems and for spare parts, contact your authorized reseller.
Produced and distributed by
Digiplastics by Cava Srl
11/07/17 Rev. 0
