CANOPY COVER-UP ECO & ECO
LARGE / COVER-UP ELITE 100 & 120
Instruction Manual and Assembly Guide
Pos.
Drawing
N
° Pc.
Description
Pos.
Drawing
N
° Pc.
Description
3
2
Supporting
Plastic Post
1
2
Aluminum
Profile
4
1 Kit
4x Self-
tapping
Screws
2
1
Polycarbonate
sheet
5
Screws
and plugs
1 Kit
4x Screws for
wall fixing
1
1
2
3
5
Step 1
Step 2
Produced and distributed by
Digiplastics by Cava Srl
11/07/17 Rev. 0
4
4
5
ASSEMBLY INSTRUCTIONS
Prepare the pre-assembled canopy before fixing it to the wall:
-
Insert the polycarbonate Sheet
in the front and rear aluminum profiles . Make sure that the UV label facing is up !!!
-
Insert the assembled sheet +Aluminum
into the slot of the plastic frame ( )
-
Secure with screws 2x
the plastic arm to the aluminum profiles
-
Insert the other plastic arm and tighten all screws with other arm 2X
-
Drill 4 holes in the wall suitable for attaching the canopy. Consider a distance between the holes in height of 175 mm. Measure
the distance between the holes for horizontal position.
-
It is advisable to seal with a neutral silicon, the fissure between the rear aluminum profile and the wall
3
1
4
2
3
2
5
5
Covery
Modern Canopies
4
3
1
4
