5
9911
34
5_
0
0
ENGLISH
INSTRUCTIONS FOR USE
CATU S.A. BAGNEUX 10/20 Avenue
JEAN-JAURÈS - B.P.2 92222
BAGNEUX CEDEX (FRANCE)
Phone: (33) 01 42 31 46 00
Fax: (33) 01 42 31 46 32
Phone business: (33) 01 42 314646
EN 340:2003
EN ISO 13688:2013
DECLARATION OF COMPLIANCE
The company: CATU SA
DECLARES
That the PPE III cat. described below :
protective garment model AFG-1 and AFG-2
has been manufactured to comply with the provisions of the Regulation (EU) 2016/425, in compliance to EN 340:2003 and EN ISO
13688:2013 for basic use (Protective Clothing. General Requirements), to EN ISO 11612:2015 (Heat and flame protective wear), to EN
ISO 11611:2015 (Protective wear for welding and other technical joint forming processes), to EN 1149-5:2008 (Antistatic protective
wear), to IEC 61482-2:2009 (Protection against heat hazard of an arc flash), and are identical to the PPE covered in EC certificate no for
AGF- 1 Coverall nº: 18/0577/00/0161, for AGF- 2 Suit nº 18/0578/00/0161, ISSUED by AITEX, Plaza Emilio Sala nº 1, Alcoy, Spain,
Notified Body 0161.
The PPE is manufactured with the following materials: Woven fabric
–
composition: 80 % Cotton, 19% Polyester and 1% antistatic
fiber with an approximate weight of 300 g/m2.
This product is subject to the procedure set out in Annex VIII
–
Module D from PPE Regulation 2016 /425) under the supervision of
the notified body to be completed
FRAMEWORK FOR PROTECTION AND PROTECTION LEVEL
Heat and flame protective wear > Levels of protection in compliance with EN ISO 11612:2015 :
Limited flame propagation: A1+A2
Convected heat: B1
Performance level
Intervals between values HTI
a
24
Min.
Max.
B1
4
< 10
B2
10
< 20
B3
≥ 20
Radiantheat:C1
Performance level
Average time to reach RHTI
a
24
Min.
Max.
C1
7
< 20
C2
20
< 50
C3
50
< 95
C4
≥ 95
Iron splashes: E2
Performance level
Iron mass (g)
Min.
Max.
E1
60
< 120
E2
120
< 200
E3
≥ 200
Heat by contact: F1
Performance level
Threshold time (s)
Min.
Max.
F1
5
< 10
F2
10
< 150
F3
≥ 15
Designed for use in industrial activities where the wearer is exposed to:
• Brief contact with an open flame.
• Convected heat of less
than 80 kW/m2.
• Sour
ces of radiant heat of less than 20 kW/m².
• Contact with splashes of molten iron.
•
Contact with hot surfaces of 250ºC.
0161