Remtron Pump Boss II
User Manual
11
9M02-8814-A001-EN
Version 2.3
To ensure trouble-free performance, route the cable away from sources of heat such as the engine block, exhaust
manifold, and exhaust pipe. The cable is rated for a maximum temperature of 185°F (85°C). Secure the cable in
an out-of-the-way location where it will not be crushed or snagged. Before mounting the antenna, make sure the
cable reaches the receiver box.
4.4
RCA7 Long Range Antenna
The RCA7 Long Range Antenna is mounted directly to the pump. The antenna mounting template is shown in
and may be photocopied for direct application to the mounting surface.
Tools Needed:
•
Drill or punch for 3/16 and 5/8-inch diameter holes
•
#1 Phillips screwdriver
•
Center punch
•
Adhesive tape (such as masking tape)
4.4.1 Installation Procedure
1. Tape the mounting hole template to the mounting surface. Locate the four hole centers on the mounting
surface by punching through the paper template with the center punch.
2. Remove the template and drill the four holes as indicated on the template.
