Cattron DYNAGEN TOUGH Series TE410, User Manual

Page: 33 / 114

DynaGen
TM
TOUGH Series
TM
TE410 - EN
User Manual
33
9M02-9249-A001-EN
Revision A
Item / Symbol Name Description
Up/Speed Increment
Button Used for moving around in the menu, changing a setting
’s value, or
incrementing the engine speed in manual mode.
Scroll/Enter Button Used for entering the menu system, accepting settings, or changing
the currently displayed parameter page.
Down/Speed
Decrement Button Used for moving around in the menu, changing a setting
’s value, or
decrementing engine speed in manual mode.
Generator/Engine
LED Green = Engine running with no issues
Amber = Engine running with warnings
Red = Engine shut down on failure
4.1 Modes, Starting and Stopping
The following table describes the operating modes of the controller.
Mode/State Description
Off When in the Off Mode, the engine cannot be remotely started.
Auto When in the Auto Mode, the engine waits to receive a start command.
Running When engine is Running, the controller monitors engine parameters and waits to receive a
stop command.
Failure When a Failure occurs, the controller shuts down the engine and displays the reason for
failure. The unit must be reset using the front panel OFF button, with the exception of
Modbus.
Menu When in the Menu Mode, settings can be changed, and the Events History may be viewed.
The following table describes the different methods for starting a controller. Unless you are using the Manual
Run method to start the controller, the controller must be in Auto Mode.
Starting Methods
Methods Description
Manual Run Pressing the RUN button will start the engine. You must press the OFF button to
shut down the engine.
Key Switch Start Manual start via the key switch switched input. A switched input must be set to
key switch function.
Switched Inputs When this input is active, the engine will start. When the input becomes inactive,
the engine will shut down.