E
-2-
Camping tent ZAGOR
Instructions for use
Dear Customer, thank you for buying this tent.
We believe that you will be fully satisfied. This
guide is intended for effective use of the pro-
duct.
Keep it for its future use. Before assembling
the tent first read this manual carefully.
Warning
ź
Never place near the stove, open flame or
other heat sources. We recommend that
you always put a tent on the side of the
upwind from the fire. This will reduce the
risk of fallout embers on the tent.
ź
Never use a candle as a light source inside
the tent. Inside the tent also cook or
otherwise tamper with any heat source.
You can suffocate or otherwise hurt.
Stoves, lanterns or heaters can break
down and begin to burn. The fire spread
very quickly, and you do not manage to lea-
ve the tent in time!
ź
The space inside the tent is always tho-
roughly ventilated. Never completely seal
the tent. Always leave ajar small part.
Never leave a tent fit snow, levels of carbon
dioxide and carbon monoxide may dange-
rously increase!
ź
When choosing the location for camping
always keep awareness of the danger of
falling rocks, falling branches, strong wind-
s, avalanches and floods, etc.
Maintenance
ź
Clean lukewarm water (40°C) only using a
mild detergent-based soaps.
ź
Never use bleach and fabric softener
effects!
ź
Wipe with foam sponge or soft cloth only.
Wipe the dirt from the tent area and clear
water rinse.
ź
Before storing for a longer period it is
necessary tent cleaned and dried tho-
roughly. After the drying time should not be
exposed to radiant heat tent (must be dried
over an open fire or near heat sources). If
drying is not possible to be done immedia-
tely, it is necessary to do so at the earliest
possible opportunity.
ź
Beware, if it remains wet for longer tent col-
lapsed, may cause a devaluation!
ź
For a good function and durability of the zip-
per and tie strings should occasionally
their path paraffin (e.g. candle).
ź
Store in a dry and dark place at 5°C to
40°C.
The guarantee does not apply:
On the natural wear of functional parts of the
product due to its use. On the servicing associ-
ated with standard maintenance product (eg.
Cleaning, replacement of parts subject to nor-
mal wear and tear). Defects caused by exter-
nal influences (eg. Climatic conditions, dust,
improper use, etc.). Mechanical damage due
to fall and crash, blow into it like. Damage cau-
sed by improper use, overloading, use of
incorrect parts, unsuitable accessories or
unsuitable tools like. In the defective products,
which were not properly protected against
mechanical damage during transport bears
the risk of any damage only owner.
Supplier reserves the right to make changes in the instructions for use and is not liable for possible printing errors.
The illustrations and descriptions may differ from reality depending on the model.
