Web Control
Transmit R2TP
GE
Select stream port for transmitting: GE1/GE2 or GE3/GE4
Mode
Set the work mode: TX (Transmitter)
Protocol
Select transport protocol: R2TP
IP
Input the IP address of RX of target IVP-3000 device
Port
Set the R2TP port of TX. Make sure the R2TP port of TX and target RX to be
the same
Description
Describe the stream by custom to identify it
Source
Select the source of the stream to transmit
Transmit R2TP-S
GE
Select stream port for transmitting: GE1/GE2 or GE3/GE4
Mode
Set the work mode: TX (Transmitter)
Protocol
Select transport protocol: R2TP-S
IP
Input the IP address of target R2TP Relay Server(RRS)
Port
Set the R2TP-S port of TX. Make sure the R2TP-S port of TX, RRS, and
target RX to be the same
Description
Describe the stream by custom to identify it
Source
Select the source of the stream to transmit
After the transport stream is configured, click on and click to enable the transmitting.
Click off and click to stop the transmitting. Click to refresh current page.
Diagram on the right displays the real-time transmitting bit rate of TX, click the diagram to view
the detailed status statistics, as follows:
