background image

22

CARE AND CLEANING

CARE AND CLEANING

Jug and lid

To avoid food drying on blades, jug and lid, 
follow the below steps as soon as possible 
after use:

•   Rinse most of the ingredients off  the jug 

and lid.

•   Add 500ml of warm water and 1–2 drops 

of detergent and press the AUTO CLEAN 
button.

•   Rinse the jug and lid again and/or wash 

separately in warm soapy water with 
a soft cloth or bottle brush.

Sanitising

The recommended sanitising solution 
is 1 1/2 teaspoons (7.5ml) of household 
bleach in 8 cups (2 litres) of clean, cool 
water, mixed according to the recommended 
instructions on the bleach container. 
To sanitise, follow the below steps:

1.   After performing the auto clean cycle 

as per the instructions above, add half 
(4 cups / 1L) of the recommended 
sanitizing solution to the jug. Secure the 
lid and inner lid and press AUTO CLEAN 
to run a sanitising clean cycle.

2.   Allow to stand for 1 minute, then empty 

solution.

3.   Soak lid, inner lid (also scraper spatula 

and frozen dessert tamper if used) in the 
remaining second half of the sanitising 
solution mixture for 2 minutes.

4.   Place the empty jug and lid back on 

blender base and run on manual speed 
MIX for 10-20 secs to remove any excess 
moisture from the blade area.

5.   Wipe the exterior of the lid, jug and base 

with a soft cloth dampened with the 
sanitising solution.

6.   Do not rinse after sanitising. Allow to 

air dry before storage. Rinse with clean 
water prior to next use.

Motor base

To clean the motor base, wipe with a soft, 
damp cloth then dry thoroughly. Wipe any 
excess food particles from the power cord.

Cleaning agents

Do not use abrasive scouring pads or 
cleaners on either the motor base or the jug, 
as they may scratch the surface. Use only 
warm soapy water with a soft cloth. 

Dishwasher

The blender jug and lid can be washed in the 
dishwasher on a standard wash cycle. Jug 
can be placed on the bottom shelf, however 
the lid and inner lid should be on the top 
shelf only.

Stubborn food stains and odours

Strong smelling foods such as garlic and 
fi sh, and some vegetables such as carrots, 
may leave an odour or stain. To remove, 
clean the jug and lid using the AUTO CLEAN 
instructions. 

Add 2 tablespoons bicarbonate of soda 
and 1/2 cup (125ml) vinegar into jug and 
let the mixture froth for 1 minute. Scrub the 
jug and lid with the mixture using a soft 
dishwashing brush. Add 2 cups warm water 
and allow to stand for 5 minutes. Attach jug 
to blender base. Secure lid and then press 
the AUTO CLEAN button. Thoroughly rinse 
the jug, and allow to air dry. Store jug and lid 
with the lid off  to allow air to circulate.

Summary of Contents for BL 9010





























Reviews: