![CATH-TECH CIC-200 Operation Manual Download Page 4](http://html1.mh-extra.com/html/cath-tech/cic-200/cic-200_operation-manual_2574336004.webp)
Rev 0 – Nov 2016
CIC-200 Manual
2
Limited Warranty
All Cathodic Technology Limited (Cath-Tech) instruments and equipment are
warranted against defects in materials, design or workmanship for a period of two
years from date of sale. This warranty excludes damage due to misuse, abuse,
tampering or acts of God such as fires, floods, wind damage, lightning etc.
We will repair or replace at our option any defective component, after examination
in our manufacturing facility, if the fault is due to defective materials or labour,
within two years of the purchase date. For warranty repair, a Returned Goods
Authorization (RGA) must be obtained from Cathodic Technology Ltd prior to
shipping the defective unit pre-paid to our location.
Note
:
There is no warranty expressed or implied on batteries.
Cath-Tech Policy
Cath-Tech extends a two-year in use warranty on all units, which have been
designed and/or manufactured by Cath-Tech staff.
Cath-Tech reserves the right to make any changes in design or specification
which it deems an improvement, with no liability to make the same changes on
existing equipment.
This warranty is in lieu of all other warranties or guaranties, expressed or
implied, which might otherwise exist. The purchaser is relying only upon this
guarantee and not upon any representations not herein expressed.
Any material or equipment being returned to the factory must first have a
Returned Goods Authorization (RGA) from Cath-Tech.
Safety
Do not operate the CIC-200 GPS synchronized current interrupter during electrical
storms. Damage to both the CIC-200 GPS synchronized current interrupter and the
rectifier could occur.
The installation of the CIC-200 GPS synchronized current interrupter requires
electrical connections in the rectifier. Only personnel who are trained in electrical
safety should undertake this. The CIC-200 can interrupt either DC or AC current.
Turn the AC supply to the rectifier OFF and verify with a volt meter before making
any connections to the rectifier.