CATH-TECH CI-100TS, Operation Manual

Page: 15 / 24

Revised July 2020 CI-100TS Current Interrupter Manual 13
If all the entered data is correct, the program will be saved, and the following message appears for
a short time:
Then the unit will return to the Add new program screen. In the Add new program page, the new
program will be added to the existing programs list.
Please note, in this stage, the program is only defined. To complete the operation and add the new
defined program to the activated program list and run, the user must activate the new program.
Program activation
To activate a program, the user must tap the desired program index button from the existing
program list in the
Add new program screen and then tap forward arrow. Active programs are
green and dormant programs are grey. Tap the program number to activate or deactivate.
If there are no conflicts between defined programs in terms of Start and End time, the selected
program/programs will be activated, and the following message will appear:
If there is a conflict between the selected program and other active programs, an error message
will be displayed and the user must resolve the conflict by entering the Edit screen from the setup
page and edit existing program/programs (page 14). Unless the conflict is removed, the user cannot
activate that program.
Program deactivation:
When the user wants to deactivate an activated program, the corresponding program index must be
toggled (index button will turn grey). Tap the forward arrow to save and return to the settings screen.