background image

SL-WA100

Always charge the product before use.

Automatic battery-saving function : 
When the remaining battery power is low, the lighting mode changes to slow flashing. 

Charge the light as soon as possible.

Manual

Standard 
charging time

Approx. 

2 h

(USB 2.0)

ENG

HOW TO CHARGE

SWITCH  OPERATION

1

HOW TO MOUNT

2

3

Light unit

+ Clip bracket

USB cable
(MICRO USB)

Rubber band 

and hook

Before using the light, read this manual 

thoroughly and keep it for future refer-

ence.

WARNING!!!

• Check periodically to ensure that the light 

unit is attached securely. 

Do not use a damaged rubber band.

• Always attention to the remaining battery 

power by checking the indicator periodically 

while using.

CAUTION!

• Stop your bicycle to operate the switch.

• Do not place it within children’s reach.

• This unit is not totally waterproof. 

Please wipe and dry it completely after using 

in rain. Otherwise, it may cause failure.

• If the light unit or parts become dirty with 

mud, etc., clean with a soft cloth which is 

moistened with mild soap. Never apply paint 

thinner, benzine or alcohol; damage will result.

LITHIUM-ION BATTERIES

Cautions on recharging

• We recommend using 500+mAh (USB2.0) 

USB battery charger.

• Avoid charging in direct sunlight or in a 

vehicle parked under direct sunlight, and 

make sure to charge only when the ambient 

temperature is between 5 and 40°C.

• Before charging, be sure that no dust or 

other foreign objects attach to the USB plug. 

• Do not subject the light to vibrations while 

charging.

• When your PC is in sleep state, the unit 

cannot be charged.

• Once charging is complete, be sure to 

disconnect the USB plug.

• Charging and lighting times are approxi-

mate values, and will vary by environmen-

tal and user conditions. 

Cautions in use

• Charging, discharging, and storing in high 

temperatures will cause the rechargeable 

battery to deteriorate faster. Do not place 

the light inside a vehicle or near a heater.

• If the illumination time is significantly 

reduced even after proper charging, the 

rechargeable battery may be nearing the 

end of its service life. Dispose of the battery 

as described in “Cautions for dispose”.

Cautions on storage

Cool and dry storage is recommended. For 

long period storage, it is important to charge 

the battery 30 minutes every 6 months.

Cautions for dispose

When disposing of the light unit, remove 

the internal rechargeable battery and 

dispose of it according to local regulations.

Charge jack cover

USB cable

2

1

To PC or USB battery charger

Charging 

(Illuminated in red)

Charging is completed

(Off)

Indicator

Clip bracket

Light unit

+ Clip bracket

Install

Remove

Click

How to mount the unit on your bicycle

Rubber band and hook

Seatpost

OK

NO

How to mount the 

unit on your backpack

Confirm the jack cover of 

the light unit facing the 

clip bracket tab, and snap 

the unit on the bracket. 
Remove the unit from the 

bracket by turning the 

unit to the left or right.

Press and hold 

ON

OFF

Remove / Install clip bracket

1

1

1

2

2

2

Approx.Ø26 – Ø32 mm

High

Low

Flashing

Rapid

Group Ride

Daytime 

HyperFlash

Switch 

Click

Approx. 

1h

Approx. 

10h

Approx. 

30h

Approx. 

10h

Approx. 

10h

Approx. 

13h

Design Pat. Pending

Copyright© 2018 CATEYE Co., Ltd. 
SLWA100-180308   

3

Reviews: