SPECIFICATIONS
Light source
LED x 2
Cartridge battery
Li-ion 3.6 V 6800 mAh : BA-6.8TF
Charge terminal
Micro B USB
Operating time
High
: Approx. 2 hours
Middle
: Approx. 5 hours
Low
: Approx. 15 hours
Daytime HyperConstant : Approx. 12 hours
Flashing
: Approx. 150 hours
* Average runtime at 20˚C.
Standard charging time
Approx. 5.5 (1.5 A) – 15 (0.5 A) hours
Charge voltage
5 V
Temperature range
Charging : 41˚F – 104˚F (5˚C – 40˚C)
Operating : 14˚F – 104˚F (-10˚C – 40˚C)
Recharge/discharge number
of times
About 300 times
(until the rated capacity drops to 70%)
Waterproof
IPX4
Dimensions/weight
4-45/64" x 2-13/64" x 1-55/64" (119.3 x 56 x 47.3 mm) /
9.04 oz (256.3 g) (Including the cartridge battery)
* The specifications and design are subject to change without notice.
LIMITED WARRANTY
2-year Warranty : Light unit only
(Deterioration of the cartridge battery is out of warranty)
CatEye products are warranted to be free of defects from materials and
workmanship for a period of 2 years from original purchase. If the product
fails to work during normal use, CatEye will repair or replace the defect at no
charge. Service must be performed by CatEye or an authorized retailer. To
return the product, pack it carefully and enclose the warranty certificate (proof
of purchase) with instruction for repair. Please write or type your name and
address clearly on the warranty certificate. Insurance, handling and transporta-
tion charges to CatEye shall be borne by person desiring service.
For UK and REPUBLIC OF IRELAND consumers, please return to the place of
purchase. This does not affect your statutory rights.
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
4 HOW TO REPLACE THE CARTRIDGE BATTERY
Remove the cartridge battery according to the procedure. (
1
–
2
)
To install the cartridge, reverse the procedure.
CAUTION!: Make sure the lock pin fits firmly into the cartridge battery.
If not locked firmly, the cartridge battery may drop off and it may
cause sudden turn off.
3 SWITCH OPERATION (SWITCHING THE LIGHTING MODE)
The ON/OFF and lighting modes are selected using a switch.
*2 When you turn the light on, it lights up in the last lighting mode you used. (Mode memory function)
* The light unit may get hot depending on the condition the light is used in but it is not a malfunction. When it gets hot, protection circuit activates and it auto-
matically lowers brightness level. One it is cooled down, the light recovers the previous brightness level.
5341831N
Helmet mount
5342440
Center fork bracket
1604110
Out-front bracket 2
5342730
USB cable
5343200
Cartridge battery
(Li-ion 3.6 V 6800 mAh)
5338827N
FlexTight™ bracket
(MICRO USB)
(BA-6.8TF)
(H-34N)
Remaining battery capacity (Battery indicator)
When the switch lights up, there is little remaining battery power.
Switch button light
Remaining battery power
Illuminated in orange
50 - 30 %
Illuminated in red
30 - 15 %
Flashing in red
Less than 15%
CO.,LTD.
2-8-25, KUWAZU, HIGASHI SUMIYOSHI-KU, OSAKA, JAPAN 546-0041
For inquiries, please visit https://cateye.com/intl/contact/
[For US Customers]
Please visit https://www.cateyeamerica.com/contact-us/
Toll Free : 800.5.CATEYE
1
2
Lock pin
Cartridge battery
Double-click
*2
*2
Press
and hold
Press and hold
OFF
ON
Click
Click
High
High
High
High
Middle
Middle
Low
Low
Daytime
Daytime
HyperConstant
HyperConstant
Flashing
Flashing
Approx.
5 h
Approx.
15 h
Approx.
12 h
Approx.
150 h
Approx.
2 h
Switch (Indicator)
OK
NO!
