6
HOW TO MOUNT TO A BICYCLE
(3/3)
Knob
Unlock
Lock
Check that the light turns on when you press the remote control
switch near the control unit.
CAUTION!:
Do not look directly at the light when it is on.
7
8
9
Set the knob of the control unit to the “Unlock” position, align the battery unit with the position
alignment mark, and then slide the battery unit into place.
CAUTION!:
After you connect the battery unit, be sure to set the knob back to the “Lock”
position to lock the battery unit in place.
To remove the battery unit, set the knob to the “Unlock” position, and then pull out the battery unit.
Position alignment mark
Control unit
Slide
Battery unit
Top tube
Fixing strap
Pull tightly
Insulation
sheet
Rubber band
(WSW-001)
Connect the plug so that the directions of the arrow
and the mark match. To remove the plug, hold the
ring, and then pull out the plug.
6
Ring
Control unit
Plug
