Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Strada Smart
You can choose to display current speed, cadence, or heart rate at the top of the screen.
Measurement items that require a sensor that is not paired cannot be selected.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, Strada Smart returns to the measurement
screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Press MODE to select one of the three displays.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Summary of Contents for Strada Smart CC-RD500B
