Cateye Stealth EVO+ CC-GL51, Quick Start Manual

Page: 42 / 56

Quick Start Manual
Perform measurement
Important: The following measurements cannot be
made in locations where a GPS signal can-
not be received:
Displaying altitude and recording route
•
information
Measurements without an ANT+ sensor
•
Turn on the power by pressing and holding the
11
button.
The GPS search screen is displayed.
When a GPS or speed signal is received or when the
MODE button is pressed, the STEALTH evo+ switches to
the measurement screen.
Check that
21
(GPS signal) or (speed signal) is displayed
on the measurement screen, and press the button.
STOP changes to GO, and measurement starts.
During measurement, measurement starts and stops
automatically in sync with the movement of the bicycle.
Start measurement Start measurement
GPS search screen
GPS signal or
speed signal
received
or
Measurement screen
(Measurement stops)
(Measurement
starts)
Press & release
GO
MODE
Return to Contents
Stop measurement Pause measurement