24
6
Click on [STEALTH] to change the settings
Before changing the settings, click on [Read] to load the settings of the computer.
Change the settings according to the following procedure.
Setting items
Description
Time zone
Select the city code nearest from your current location.
* For details, see “Time zone list” (page 6).
Daylight saving
time
Select whether to use the daylight saving time.
• On : Moves the clock 1 hour ahead.
• Off : Displays in regular clock.
Speed unit
Select the speed unit (km/h or m/h).
Night-time
setting
Set the time when the backlight lights up.
• Night Mode On :
Enter the start time when the backlight lights up.
• Night Mode Off :
Enter the end time when the backlight lights off.
(Example) When lighting up from 7:00 pm to 6:00 am
Night Mode On : 19
Night Mode Off : 6
* When you do not want to turn on the backlight throughout the day,
set the same value for both “Night-time setting ON” and “Night-time
setting OFF”.
Setting items
Description
Tire circumfer-
ence
This is not used with this unit.
Total distance
You can enter the start value of the total distance, and add the trip
distance to it.
(Setting range : 00000 to 99999)
* This can be used when you renew and/or reset the computer.
* Enter the total distance in integer number only.
Sampling interval
Set the record interval of the measurement data.
* The maximum recording time (total time of all trip data) and the
maximum time for one trip depend on the interval selected.
• 1s (at intervals of 1 second) : 35 hours / 12 hours
• 2s (at intervals of 2 seconds) : 70 hours / 24 hours
• 5s (at intervals of 5 seconds) : 175 hours / 60 hours
Clock display
format
Select the display format of “12h” (12 hours display) or “24h” (24
hours display).
* Date and clock are acquired from GPS signal; therefore, it is not
necessary to enter them.
Function
display
You can hide undesired functions.
(Check mark: function displayed, No check mark: function hidden)
* Heart rate and cadence cannot be used with this unit.
* Measurement is performed for hidden functions. When a hidden
function is displayed again, its measurement results will be reflected.
Middle display
Select the middle display of the measurement screen.
• Clock : Displays the clock.
• Altitude : Displays altitude.
7
Click on [Apply]
The changes are reflected to the computer.
Remove the computer from the cradle. Now, changing the computer configuration is
completed.
Delete the data recorded
in the computer.
Read the current settings of the
computer.
