1
unit on your bicycle
Introduction
CYCLOCOMPUTER CC-GL11
Features of this unit
Measurement method
This unit is a cyclocomputer, having a GPS and acceleration sensor built-in, which can per-
form measurement by receiving GPS signal, without speed sensor.
Recording and viewing the trip route
Position information from GPS is recorded with measurement data during measurement.
The measurement data such as your route and altitude can be viewed as a trip on a map on
the site, by loading them into the dedicated software application “CATEYE Sync™” on your
PC, and then uploading to the special website “CATEYE Atlas™”.
”CATEYE Atlas™” can be used as a database for your cycling life, where you can store the
trips measured using this unit or CATEYE INOU, a trip recorder with camera.
Icons used in this manual
• This manual indicates computer button operations as shown below.
Press the button
MODE
Press the MODE button
Press the button
for 2 seconds
MODE
Press the MODE button
for 2 seconds
MENU
Press the MENU button
• For explanatory purposes, in this manual red text/icons on the computer screen represent
flashing items.
Before using the computer, please thoroughly read this manual
and keep it for future reference.
* This PDF contains a link to YouTube.
When you click on the button “Watch a video”, a message regarding security
appears.
Click the “Allow” to open a browser and play the video.
* YouTube videos and instruction manuals related to this product are subject to
change without notice.
For the latest edition of the instruction manual (PDF), visit the official CatEye
website.
* This manual has been prepared on the assumption that the user has sufficient
basic knowledge, including operation and terminology of PCs (Windows / Mac).
Instruction manual
ENG
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
L’appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard exempts de licence (s).
Son utilisation est soumise à deux conditions :
1. L’appareil ne doit pas provoquer d’interférences nuisibles, et
2. L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by CatEye Co., Ltd. may void the user ’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
066601231
1
