7
EN
Operation
Caution:
• This appliance incorporates a protective device against high temperatures. If appliance
overheats, the unit will turn off automatically. After cooling down sufficiently (about 15
minutes), it will resume operation automatically .
• DO NOT run the appliance continuously for more than 1 minute.
• If operation is not finished within 1 minute, turn off the machine and let cool for at least
10 minutes before next round of use. If more than 5 rounds of operation are required,
let the machine cool for at least 90 minutes to room temperature before the next 5
rounds. This can lengthen lifespan of the machine.
• Be careful when hot liquid is poured into the bowl or blender jar as it may be ejected
out due to a sudden steaming.
1. Turn the switch knob to select speed setting “0”, then plug in the appliance.
2. Turn the switch knob to select a suitable speed setting. The relative speed indicator light will
illuminate and the appliance will start to work.
3.
Pulse function:
Press down the switch knob and hold to start. Release to stop.
4. After use, select the speed setting “0”, then unplug and let the motor cool down.
Cleaning, Care & Maintenance
• Always disconnect from power supply before cleaning.
• Always allow to cool before cleaning.
• Let the motor come to a complete stop before disassembly and cleaning.
• Never immerse the motor base in water, nor rinse it under running water.
• Use warm, soapy water and a damp cloth to clean all removable parts.
• Dry thoroughly after cleaning.
Warning: Blade is sharp - handle with care.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
Probable Cause
Solution
The unit is not working
The unit is not switched on
Check the unit is plugged in correctly
and switched on
Plug or lead is damaged
Replace plug or lead
Fuse in the plug has blown
Replace the plug fuse
Mains power supply fault
Check mains power supply
Parts not mounted securely
Mount the parts securely
Appliance stops working
suddenly
Appliance overheats thus auto
re-set is activated
Let the appliance cool sufficiently
Motor works while
components do not run
Driver not installed correctly
Re-install the driver
CJ107_EN_A5_v1_20220721.indb 7
CJ107_EN_A5_v1_20220721.indb 7
2022/7/21 17:08
2022/7/21 17:08
