688217 nl en ma 2016
29
EN
G
LIS
H
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the above steps.
3. If press
at the last step, it will turn back to Ready Mode. The setting will be no use.
13. Double/Triple Quantity cooking
1. If the "
X2
" or "
X3
" button is pressed in Ready Mode, followed by the starting of a Preset Program,
or if the "
X2
" or "
X3
" button is pressed in 5 seconds of starting a Preset Program,
the oven will start cooking with the quantity preset cooking time.
2. Press "
X2
", "
DOUBLE
" displays. Press "
X3
", TRIPLE displays.
When press number buttons, the screen will display the quantity preset time.
For example, number button "
5
" and its preset time is 1 minute.
Then press "
X2
", then time will change to 1:00*2=2 (2 minutes).
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
14. Stage Cooking programming
This allows the user to cook food items at manual cook mode and programming mode.
1. Three stages can be set at most under cooking mode or programming mode. After setting the power
and time for the first stage, press "
Time Entry
" to set the second stage.
And the same step to set the third stage.
2. When setting the second, third stage, press "
Time Entry
", "
STAGE 2
", "
STAGE 3
" displays.
3. Press
button to start cooking.
Example:
In programming mode, press number buttons "
3
" to set two stages cooking.
The first stage is PL7 and time is 1 minute 25 seconds.
The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow.
a. Open the door ,press number button "
1
" for 5 seconds, "
pROGRAM
" displays.
b. Press number button "3", the screen will display "
p:03
",After two seconds,
the screen will display the related time "
00:30
".
c. Press "
1
", "
2
", "
5
" to input the cooking time. "
01:25
" displays.
d. Press "
Med-Hi 70%
", "
1:25 70
" displays. The first stage is finished.
e. Press "
Time Entry
", "
STAGE 2
" displays.
f. Press "
5
", "
4
", "
0
" button, "
5:40
" displays.
g. Press "
Medium 50%
", "
5:40 50
" displays. The second stage is finished.
h. Press
button to start cooking.
i. The total time counts down.
15. filter Cleaning function
1. If User Option OP:01 is selected and the setting time arrives,
the oven will remind the user to cleaning the filter.
Note:
The oven must be electrified.
2. The screen will display "
CLEAN fILTER
". At this time, pressing
button or opening the door will put
the oven into Ready Mode.
3. If you do not need to clean the filter, press
button and hold for 3 seconds to clear out the reminder
information. Otherwise, the oven will remind you all the time during Idle Mode.
