- 4 -
I.
Specification
1). Item No.: *688.061
2). Power Rate: 200 - 3500 W
3). Voltage: 230V~ 50Hz
4). Temperature: 80ºC - 270ºC
II.
Important
Please read carefully the following instructions before using the induction cooker.
1). Do not plug in with wet hands in order to avoid electric shock.
2). Do not plug into a socket where several other appliances are plugged in.
3).
Do not use if the power cord is damaged or the plug does not fit the socket safely.
4). Do not open the cooker to replace spare parts by yourself.
5).
Do not use the cooker close to flames or wet places.
6). Do not use where children can easily touch the cooker, or allow children to use the
cooker by themselves.
7). Do not place on unstable surfaces.
8). Do not move the cooker together with a pot.
9). Do not heat an empty pot or overheat to avoid dry boiling.
10). Do not place metal objects such as knives, forks, spoons, lids, cans, and aluminum foils
on the top plate.
11).
Leave sufficient space around the machine. Keep the front side and either right or left side
of the machine clear.
12). Do not use the machine on carpet or tablecloth (vinyl) or any other low-heat-resistant surfaces.
13).
Do not place paper between the pot or the pan and the top plate. This is a fire hazard.
14).
If the surface is cracked, switch off the machine and take to the service center immediately.
15). Do not block air intake or exhaust vent.
16). Do not touch the top plate right after removing the pot or the pan, as the top plate will
still be very hot.
17).
Do not place the cooker close to objects which are affected by magnet, such as: radios,
televisions, automatic-banking cards or cassette tapes.
18).
The power cord must be replaced by a qualified technician.
19). Surface stand may get hot during use so do not touch with bare hands.
III.
Operating Instructions
1). After pressing the
"ON/OFF"
button, the induction cooker is ready for heating.
Press the
"Function"
button to select the required mode.
2). Fire Control You can adjust the power level by pressing
"
+
" or "
-
"
.
3). Timer Function Press the
“Timer”
button to enter the timer mode. When the timer indicator
lights up and the numbers blink on the display, press the
"
+
" or "
-
"
button to adjust the time
duration. Once the time is set the number on the on the display will blink for several seconds.
The induction cooker will start counting down. Once the timer is complete, the induction cooker
will automatically power off.
EN
GL
ISH
