688050-51-52 en ma 2014
5
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Machine is plugged in, indicator light
is on but machine does not heat up
1. Temperature control knob is
broken.
2. Heating tube is burned.
1. Change temperature control knob.
2. Change the heating tube.
Machine is plugged in, tempera-
ture control knob is working but the
temperature cannot be controlled
Temperature control knob is broken
or damaged.
Change the temperature control knob.
Machine is plugged in, electricity is
getting through but the indicator
light does not turn on
Indicator light is broken.
Change the indicator light
The machine is plugged in properly,
indicator light does not turn on and
the machine is not working
1. Power supply is abnormal or it
does not get through.
2. Fuse is burned.
1. Check the power cord and
connection wires to make sure
the power supply is normal and
working.
2. Change a new fuse.
The above problem solving guide is for reference only. If any problem occurs, stop using the machine
immediately and contact the manufacturer or an authorized trained technician.
DAILY CHECK
Every day check the condition of the machine to make sure it is in a working order. Look closely for any
faults, unusual smells or noises.
Before use
Whether the machine is tilted?
Whether the power cord is old, broken or damaged?
Whether the control panel is damaged?
After use
Whether there is strange smell?
Whether the upper and lower module plate cannot be heated at the
same time?
Is there any strange noise or is the machine out of control if it is lifted?
WARNING!
Check the machine everyday.
Everyday checks can prolong the life of the machine and prevent accidents.
Stop using the machine immediately if any faults or malfunctions are suspected with the circuit or machine.
Contact the manufacturer or an authorized service technician to check and service the machine
immediately.
