680120-130 G20NE
6
EN
G
LIS
H
9. The power pressure of this equipment should conform to the supply voltage of this product.
10. The user should install the suitable power switch, fuse and leakage-protector near to the equipment.
11. Before starting up, you should check whether the socket you want to use is grounded.
12. Ensure whether all the connections of all the electric elements of the product are firm or not, and
whether the safety grounding is reliable or not.
13. When you change the power cable, you should select the same model cable and: it is only allowed to
let a professional electrician do this.
14. Never use other parts than the ones which are from CaterChef.
CaterChef is not taking any responsibilty for damage caused by the use of other (non-related) parts.
15. If you need to (re)connect, repair or maintain the applaince, do not do this by yourself.
This is forbidden. This must always be done by a professional electrician.
16. If there are any abnormal phenomenons during usage, you must stop the appliance directly.
After checking you can continue to use it as long as it is safe. Do not repair the appliance by yourself.
This should always been done by a technical professional.
17. During operation or cooling down: always keep the appliance out of reach of children.
This, mainly to prevent burning injuries.
DEGREASE:
Before operating for the first time, clean the device with warm water, a wet cloth and a small amount of
detergent. Do not rinse the appliance under the tap, this could cause serious damage to the appliance.
In addition, make sure that you have dried it properly before you start operating the device.
SAFETY INSTRUCTIONS:
1. Never leave the area around the appliance during use.
(Use also includes the cooling down period).
2. Never move the appliance during use.
3. Never touch the inner pan during use.
4. The device should only be used for its intended purpose.
5. Cooling down: After usage (and after turning thermostat back to 0 and turning the switch OFF), the
appliance needs to cool down for a minimum time of 30 minutes. To prevent any burning injuries or
other danger, do not touch, move or use the appliance during this period of time.
6. After usage, turn off the switch.
7. After usage the electricity needs to be cut from the socket to prevent fire hazard.
This to prevent short circuit or danger.
8. When you move the product from its place, always pick it up from the lower side of the appliance.
Never pick it up from the upper side (baking tray) to prevent any damage to the appliance.
USER INSTRUCTIONS:
1. The thermostat is placed in front of the product (control panel) and it’s used to set the grill to the desired
temperature.
2. Turn the power ON with the main-switch (ON/OFF). Rotate the thermostat clockwise, and set the
desired cooking temperature. In this exact moment, the indicator light will go ON. Which means that
the machine is powered and the heating tubes start to work. When the temperature rises to the required
temperature, the thermostat will stop heating automatically. At the same time, the indicator light will turn
OFF.
3. If the temperature of the stove-plates fall down slightly, the thermostat will be powered ON
automatically and the indicator light will light again. Which means that the heating tube continues
heating. The temperature of the stove-plates will rise again to ensure the desired temperature within a
certain range, constantly.
4. You cannot control the machine with the timer. With the timer you can only remind yourself and others
that your cooked food is ready.
680120-130_G20NE.indd 6
680120-130_G20NE.indd 6
29-6-2020 16:18:00
29-6-2020 16:18:00