680080 nl-en ma 2019
9
EN
USERS INSTRUCTIONS:
Note
: Only place food on the shelves belonging to this device and do not place non-food products inside
the device. This can be dangerous and is therefore prohibited.
Note
: The device can become very hot, you should not touch it during use and during the cooling period
without an professional oven glove.
Operate
:
Pay attention!
The fan will not start without setting the timer.
1. Place the food on the racks and place the racks in the food dryer.
2. Set the timer. This can be done for up to 12 hours. The fan will start to operate.
3. Turn the thermostat to the desired temperature.
This can be done within the following temperature limits: 0-75ºC.
4. Wait until the food is prepared. The timer indicates this by means of a sound.
5. Always turn the thermostat and timer back to OFF, after usage.
TROUBLESHOOTING
Problem
Possible causes
Solutions
The device switches itself off
The device reaches an unsafe
temperature.
First allow the appliance to cool
down completely, make sure the
ambient temperature does not
exceed 20-25ºC and restart the food
dryer.
The device does not start
The plug is not properly inserted
in the socket.
The timer is not set.
The thermostat is not set.
Make sure the device is connected
to a grounded electrical outlet.
Set the timer.
Set the temperature with the
thermostat.
There is a metallic noise
during use.
Something is wrong with the
parts.
Do not dismantle the device yourself
and contact your local
dealer/service technician first.
The drying result is not
satisfactory.
The thermostat or fan is
defective /does not work
properly.
Contact your local dealer or service
technician to view the thermostat or
fan.
CLEANING AND MAINTENANCE:
Step 1: After usage, the device must first be switched off, after which you must remove the plug from the
socket. Always do this in the order described.
This could prevent short circuit or other possible dangers.
Step 2: Wait until the device has cooled down completely.
Step 3: Remove the parts such as the shelves.
Step 4: Clean the inside of the device with a wet cloth and then dry it thoroughly.
Pay attention!
Do not rinse the device with water. (Don’t wash it underneath the water tap).
This could damage the device and lead to dangerous situations.
Never clean the device with a stainless steel brush. This causes scratches and damages the device.
Also ensure that the lid is properly cleaned.
Always store it inside and keep it dry.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately
collected and treated. If at any time in future you need to dispose of this product please do NOT dispose of
this product with household waste. Please send this product to WEEE collecting points where available.
